Best price guarantee We guarantee to match any price you find elsewhere.

Free screws included Save money on screws with our free fixings. *Screws are only provided free with our Non-Slip Decking Strips

Dino Grip is a division of Richco International.

5-year guarantee All our FRP Products are covered by a 5-year guarantee for your peace of mind.

Also find us on Amazon and eBay If you prefer to use Amazon or eBay, you can purchase our products there.

  • Non-slip FRP 'Aqua-Strips'
  • Web_web-700×600
  • Dino Grip Anti Slip Decking Strips
  • Decking Strips
  • decking strips on steps
  • decking strips on bridge
  • IMG_5289
  • Dino Grip Non-slip decking strips

Non-Slip FRP Aqua-Strips


Wooden decking areas are notorious for becoming slippery when wet, or when covered with algae. Dino Grip Non-Slip ‘Aqua-Strips’ are a quick and easy way to improve safety on wood deck flooring – they create an instant non-slip surface, right over the top of your existing decking!

‘Aqua-Strips’ are provided with Free Standard 1-1/2″ Steel Screws! 

Not sure, need a sample? Click here to request a Sample!

Install Guide
Data Sheets

Dino Grip FRP Non-Slip ‘Aqua-Strips’ -or aquatic decking strips- are a quick and easy way to improve safety around your “barefoot” traffic areas; creating an instant non-slip surface, right over the top of your existing decking. Our Non-Slip Strips are designed to last longer than most Anti-slip Tapes.

All Decking Strips are provided with FREE galvanised 1-1/2″  Screws!

Our Non-Slip ‘Aqua-Strips’ are manufactured from FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable safety flooring solution, while gentle to bare skin.  These products have been used successful in the most extreme environments, and have been designed for Do It Yourself (DIY) projects, by simply screwing onto existing substrates, through the pre-drilled holes, using stainless steel screws. All our strips have a feather edge (smooth, slightly curved) to ensure no clipping or tripping of feet. For detailed instruction, refer to our Install Guide tab. 

Need a different size?

Available in three standard sizes and two widths. Call us and ask about our FREE custom cutting service!

If you have an existing surface that can sometimes become slippery or are thinking about installing decking, Dino Grip’s Non-Slip ‘Aqua-Strips’ are the perfect way to create your own safe and attractive walkway. 

  • Board Walks
  • Boat/ Fishing Docks
  • Ramps
  • Stairs
  • Under Water
  • Commercial/ Residential
  • State Parks
  • Theme Parks/ Attractions
  • Restaurants
  • Medical Facilities


Dino Grip will not be responsible for shade or color variation caused by application or substrate deficiencies, or fading resulting from natural causes such as weather.

See our Facebook for more pictures, reviews and any deals we ay be offering.

Verified ownerVerified owner
3 years ago
Verified ownerVerified owner
3 years ago
James D.
James D.
Verified ownerVerified owner

Absolutely the safest way to handle those slippery steps and decks!

3 years ago

  • Price Match
  • 5 Year Guarantee
  • Anti-Slip / Non-Slip
  • Designed for Wooden Decking
  • Tough & Durable
  • Quick and Easy to Install
  • Pre-Drilled Holes
  • Easy to Clean
  • Feathered Edge
  • Variety of Colors
  • Cut to Size








Dino Grip Non-Slip ‘Aqua-Strips’ are designed to have a feathered edge to either side to eliminate any trip hazard.


Dino Grip Non-Slip Decking Strips come with pre-drilled holes as standard, unlike others on the market. This saves time-on-site and makes installation quick and simple.

2” Strips – 8 pre-drilled holes per 4 ft

3.5” Strips – 16 pre-drilled holes per 4 ft.


Dino Grip Non-Slip ‘Aqua-Strips’ are manufactured from FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable product, while gentle to bare skin. These types of products have been used successfully in the most extreme environments.


Dino Grip Non-Slip ‘Aqua-Strips’ are resistant to a wide range of chemicals and are perfectly suited for use even in the harshest of environments. Chemical resistance guides are available upon request.


Dino Grip Non-Slip ‘Aqua-Strips’ are designed for DIY installations. No glue is required to install the product.  All you need are the decking strips, screws and a battery operated drill! Refer to our Installation guide on the next tab.


Dino Grip Non-Slip ‘Aqua-Strips’ are able to complement existing decking areas by making a feature of the Strips against the wooden decking as well as providing a safe non-slip surface.  However, in some public sectors it may be beneficial to use Decking Strips in Yellow to provide a contrasting color or highlighted surface.


It is warranted that all materials and workmanship utilized in the manufacture of Dino Grip Non-Slip products are of the highest quality, and furthermore that these products will be:

• Resistant to wear under normal use and conditions.
• Resistant to degradation from surface exposure to the weather.
• Resistant to corrosion and a range of chemicals.
• Resistant to delamination through thermal expansion inequities.
• Resistant to delamination through impact except for the immediate impact zone.

If the Dino Grip Non-Slip products fail to comply with the Warranty, we shall replace such products at no cost to the customer within a period of 4 weeks after official notification.

Install Guide



The wooden decking surface should be swept, and then cleaned with a suitable decking wash to remove mildew and algae. Such cleaners are readily available on the market or alternatively please use our very own Decking Wash. This will make for easier installation, lengthen the lifespan of your decking and the Non-Slip ‘Aqua-Strips’, and ensure the surface is as anti-slip as possible.

All rotten decking should be removed and replaced prior to the installation of Non-Slip ‘Aqua-Strips’. The ‘Aqua-Strips’ are only designed to be installed onto pre-existing surfaces. Decking that is questionable or rotten may give way, and would, therefore, be unsafe for foot traffic.

When installing Dino Grip ‘Aqua-Strips’, we recommend that PPE (personal protective equipment) be worn, including safety gloves and glasses, as the strips are made of textured fiberglass.


You’ll need a drill with a screwdriver head and enough screws to secure the strips to the decking boards. The number of screws needed per strip can be found in our FAQ here.

We recommend that the Dino Grip ‘Aqua-Strips’ be fixed into place using Galvanized or Stainless Steel flat star headed screw.  We do not recommend installing the Decking Strips using standard screws as these will rust, stain the decking and not sit flat into the Decking Strips, thereby creating an additional trip hazard. All of our Decking Strips come with free galvanized screws but we would recommended stainless steel screw installations near pools of water.


We are able to cut down any size strip to the size you need before shipping – just let us know when placing your order. This service is absolutely FREE.

If you need to cut the ‘Aqua-Strips’ to size yourself during your installation, we recommend that a suitable dust mask with protective safety goggles and gloves are worn.

The ‘Aqua-Strips’ should be cut outside or in well-ventilated areas using a hack-saw, a jigsaw (with a tile blade) or by using a hand grinder.

Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.


Our ‘Aqua-Strips’ are all pre-drilled, so you can install them instantly! Simply lay down all your Strips, ensuring they are in the correct place and the correct size, and drill into place using an electric drill – with the correct screwdriver head, and screws.


The decking surface should be regularly cleaned.  This allows all surface debris to be removed and reduces the build-up of mildew and algae, which are slippery and can cause a hazard.

The best way to keep your decking area clean is by using a mold and mildew cleaner, which can be applied using a stiff broom and removed with clean water.

The security of the fixings should be checked on a regular basis. Circumstances will vary, based upon the volume of foot traffic, etc. but, as a guide, monthly inspections are advised in high trafficked areas.

Data Sheets

Dino Grip Non-Slip Decking Strips are high performance safety decking strips, made from high quality FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic). They are ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.

Wooden decking areas are notorious for becoming slippery when wet or with algae growth, and the decking strips are an easy alternative for those slippery areas and can be easily installed on your own. The Decking Strips are also suitable for installation in any high trafficked areas where a quick anti-slip solution is required.

Dino Grip Decking Strips are quick and easy to install and are available in a range of colors and sizes.


  • Slip Resistant Surface
  • Impact Resistant
  • Class 1 Flame Spread – Non-sparking
  • Corrosion Resistant
  • Lightweight
  • Tough & Durable
  • Choice of Colors
  • Choice of Sizes
  • Quick Installation
  • Non Metallic


Ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.



Slip Resistant Decking Profiles

Top Finish

Carbon and Silicon Grip Top Surface

Stock Colors

Brown, Black, Buff, Yellow, Grey and Hazard (Black/Yellow)


Normally 0.16″ Thick

Chemical Resistance

Different Chemical Resistance Available, Please Call our Technical Department for Advice.

Decking Strip Weight (per metre)

1ft x 2” = 0.27 lbs

1ft x 3.5” = 0.47 lbs

Service Temperatures

-4 F – 176 F

Fire Rating

The resin system used as standard is: Class 1

Design Life

10-15+ Years (subject to traffic analysis)

General Use

Standard Pedestrian Traffic


Measured using the Pendulum test method (Four S rubber slider / 96 Slider) – standard simulated shoe sole.

Top Surface

Dry Reading

Wet Reading

Standard Grit Surface



The UK Slip Resistance Group guide to slip resistance of a floor for able-bodied pedestrians.

Four S Pendulum Value

Potential for Slip

Above 65

Extremely Low

35 to 65


25 to 65


25 and Below


To ensure that the above slip resistant levels are maintained, the Decking Strips should be kept clean in accordance with our Cleaning Guide and Tips.

You may also be interested in

  • Non-slip FRP Stair Tread

    Non-Slip FRP Stair Treads

    Dino Grip Non-Slip/ Anti-Slip Stair Treads are a quick and…

    $51.41$205.64 View Product
  • Stainless Steel Screws

    Information Dino Grip Stainless Steel Screws come in  1-1/4" inch…

    $14.40$123.25 View Product
  • Dino Grip Non-slip FRP Stair Nosing

    Non-Slip Low Traffic FRP Stair Nosings

    Dino Grip Non-Slip Stair Nosings are manufactured from FRP (Fiber…

    $9.94$53.00 View Product
  • Non-slip FRP Flat Sheet

    Non-Slip Flat Sheets

    Dino Grip Non-Slip Flat Sheets are prefabricated fiberglass panels that…

    View Product
error: Content is protected !!