Non-Slip FRP Decking Strips
$36.48 – $63.00
Wooden decking areas are notorious for becoming slippery when wet, or when covered with algae. Dino Grip Non-Slip Decking Strips are a quick and easy way to improve safety on wood deck flooring – they create an instant non-slip surface, right over the top of your existing decking!
Decking Strips are provided with Free Standard 1-1/2″ Steel Screws!
Minium Order Amount:
2″ – 500 Strips
3.5″ – 300 Strips
Decking area are notorious for becoming slippery when wet, or when covered with algae. Dino Grip FRP Non-Slip Decking Strips are a quick and easy way to improve safety on your decking floor- they create an instant non-slip surface, right over the top of your existing wood or composite decking. Our Non-Slip Strips are designed to last longer than most Anti-slip Tapes.
Decking Strips are provided with FREE galvanised 1-1/2″ Screws!
Our Non-Slip Decking Strips are manufactured from FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable safety flooring solution. These products have been used successfully in the most extreme environments. Our Non-Slip Decking Strips have been designed for Do It Yourself (DIY) projects and simply screw onto existing substrates, through the pre-drilled holes, using stainless steel screws. All our strips have a feather edge (smooth, slightly curved) to ensure no clipping or tripping of feet. For detailed instruction, refer to our Install Guide tab.
If you have an existing deck that can sometimes become slippery or are thinking about installing decking, Dino Grip’s Strips are the perfect way to create your own safe and attractive walkway.
- Board Walks
- Boat/ Fishing Docks
- Under Water
- Commercial/ Residential
- State Parks
- Theme Parks/ Attractions
- Medical Facilities
Dino Grip will not be responsible for shade or color variation caused by application or substrate deficiencies, or fading resulting from natural causes such as weather.
- Price Match
- 5 Year Guarantee
- Anti-Slip / Non-Slip
- Designed for Wooden Decking
- Tough & Durable
- Quick and Easy to Install
- Pre-Drilled Holes
- Easy to Clean
- Feathered Edge
- Variety of Colors
- Cut to Size
Dino Grip Non-Slip Decking Strips are designed to have a feathered edge to either side to eliminate any trip hazard.
Dino Grip Non-Slip Decking Strips come with pre-drilled holes as standard, unlike others on the market. This saves time-on-site and makes installation quick and simple.
2” Strips – 8 pre-drilled holes per 4 ft
3.5” Strips – 16 pre-drilled holes per 4 ft.
Dino Grip Non-Slip Decking Strips are manufactured from FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable product. These types of products have been used successfully in the most extreme environments.
Dino Grip Non-Slip Decking Strips are resistant to a wide range of chemicals and are perfectly suited for use even in the harshest of environments. Chemical resistance guides are available upon request.
DO IT YOURSELF INSTALLATION (DIY)
Dino Grip Non-Slip Decking Strips are designed for DIY installations. No glue is required to install the product. All you need are the decking strips, screws and a battery operated drill! Refer to our Installation guide on the next tab.
Dino Grip Non-Slip Decking Strips are able to complement existing decking areas by making a feature of the Strips against the wooden decking as well as providing a safe non-slip surface. However, in some public sectors it may be beneficial to use Decking Strips in Yellow to provide a contrasting color or highlighted surface.
5 YEAR GUARANTEE
It is warranted that all materials and workmanship utilized in the manufacture of Dino Grip Non-Slip products are of the highest quaility, and furthermore that these products will be:
• Resistant to wear under normal use and conditions.
• Resistant to degradation from surface exposure to the weather.
• Resistant to corrosion and a range of chemicals.
• Resistant to delamination through thermal expansion inequities.
• Resistant to delamination through impact except for the immediate impact zone.
If the Dino Grip Non-Slip products fail to comply with the Warranty, we shall replace such products at no cost to the customer within a period of 4 weeks after official notification.
HOW TO INSTALL NON-SLIP DECKING STRIPS
STEP 1 – PREPARATION & SAFETY
The wooden decking surface should be swept, and then cleaned with a suitable decking wash to remove mildew and algae. Such cleaners are readily available on the market or alternatively please use our very own Decking Wash. This will make for easier installation, lengthen the lifespan of your decking and the Non-Slip Decking Strips, and ensure the surface is as anti-slip as possible.
All rotten decking should be removed and replaced prior to the installation of Non-Slip Decking Strips. The Decking Strips are only designed to be installed onto pre-existing surfaces. Decking that is questionable or rotten may give way, and would, therefore, be unsafe for foot traffic.
When installing Dino Grip Decking Strips, we recommend that PPE (personal protective equipment) be worn, including safety gloves and glasses, as the strips are made of textured fiberglass.
STEP 2 – FIXING & TOOLS
You’ll need a drill with a screwdriver head and enough screws to secure the strips to the decking boards. The number of screws needed per strip can be found in our FAQ here.
We recommend that the Dino Grip Decking Strips be fixed into place using Galvanised or Stainless Steel flat star headed screw. We do not recommend installing the Decking Strips using standard screws as these will rust, stain the decking and not sit flat into the Decking Strips, thereby creating an additional trip hazard. All of our Decking Strips come with free galvanised screws but we would recommended stainless steel screw installations near pools of water.
STEP 3 – CUTTING NON-SLIP DECKING STRIPS
We are able to cut down any size strip to the size you need before shipping – just let us know when placing your order. This service is absolutely FREE.
If you need to cut the Decking Strips to size yourself during your installation, we recommend that a suitable dust mask with protective safety goggles and gloves are worn.
The Decking Strips should be cut outside or in well-ventilated areas using a hack-saw, a jigsaw (with a tile blade) or by using a hand grinder.
Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.
STEP 4 – INSTALLING NON-SLIP DECKING STRIPS
Our Decking Strips are all pre-drilled, so you can install them instantly! Simply lay down all your Decking Strips, ensuring they are in the correct place and the correct size, and drill into place using an electric drill – with the correct screwdriver head, and screws.
CLEANING & MAINTENANCE
The decking surface should be regularly cleaned. This allows all surface debris to be removed and reduces the build-up of mildew and algae, which are slippery and can cause a hazard.
The best way to keep your decking area clean is by using a mold and mildew cleaner, which can be applied using a stiff broom and removed with clean water.
The security of the fixings should be checked on a regular basis. Circumstances will vary, based upon the volume of foot traffic, etc. but, as a guide, monthly inspections are advised in high trafficked areas.
Dino Grip Non-Slip Decking Strips are high performance safety decking strips, made from high quality FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic). They are ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.
Wooden decking areas are notorious for becoming slippery when wet or with algae growth, and the decking strips are an easy alternative for those slippery areas and can be easily installed on your own. The Decking Strips are also suitable for installation in any high trafficked areas where a quick anti-slip solution is required.
Dino Grip Decking Strips are quick and easy to install and are available in a range of colors and sizes.
- Slip Resistant Surface
- Impact Resistant
- Class 1 Flame Spread – Non-sparking
- Corrosion Resistant
- Tough & Durable
- Choice of Colors
- Choice of Sizes
- Quick Installation
- Non Metallic
Ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.
Slip Resistant Decking Profiles
Carbon and Silicon Grip Top Surface
Brown, Black, Buff, Yellow, Grey and Hazard (Black/Yellow)
Normally 0.16″ Thick
Different Chemical Resistance Available, Please Call our Technical Department for Advice.
Decking Strip Weight (per metre)
1ft x 2” = 0.27 lbs
1ft x 3.5” = 0.47 lbs
-4 F – 176 F
The resin system used as standard is: Class 1
10-15+ Years (subject to traffic analysis)
Standard Pedestrian Traffic
SLIP RESISTANT LEVELS
Measured using the Pendulum test method (Four S rubber slider / 96 Slider) – standard simulated shoe sole.
Standard Grit Surface
The UK Slip Resistance Group guide to slip resistance of a floor for able-bodied pedestrians.
Four S Pendulum Value
Potential for Slip
35 to 65
25 to 65
25 and Below
To ensure that the above slip resistant levels are maintained, the Decking Strips should be kept clean in accordance with our Cleaning Guide and Tips.
You may also be interested in
Non-Slip Low Traffic FRP Stair Nosings
Dino Grip Non-Slip Stair Nosings are manufactured from FRP (Fiber…$9.94 – $53.00
Stainless Steel Screws
Information Dino Grip Stainless Steel Screws come in 1-1/4" inch…$14.40 – $123.25
Non-Slip Flat Sheets
Dino Grip Non-Slip Flat Sheets are prefabricated fiberglass panels that…
Non-Slip FRP Stair Treads
Dino Grip Non-Slip/ Anti-Slip Stair Treads are a quick and…$51.41 – $205.64