Non-Slip FRP Decking Strips

NON-SLIP

Dino Grip Non-Slip Decking Strips are designed to have a feathered edge to either side to eliminate any trip hazard.

PRE-DRILLED HOLES

Dino Grip Non-Slip Decking Strips come with pre-drilled holes as standard, unlike others on the market. This saves time-on-site and makes installation quick and simple.

2” Strips – 8 pre-drilled holes per 4 ft

3.5” Strips – 16 pre-drilled holes per 4 ft.

DURABLE

Dino Grip Non-Slip Decking Strips are manufactured from FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable product.  These types of products have been used successfully in the most extreme environments.

CORROSION RESISTANT

Dino Grip Non-Slip Decking Strips are resistant to a wide range of chemicals and are perfectly suited for use even in the harshest of environments. Chemical resistance guides are available upon request.

DO IT YOURSELF INSTALLATION (DIY)

Dino Grip Non-Slip Decking Strips are designed for DIY installations. No glue is required to install the product.  All you need are the decking strips, screws and a battery operated drill! Refer to our Installation guide on the next tab.

AESTHETICS

Dino Grip Non-Slip Decking Strips are able to complement existing decking areas by making a feature of the Strips against the wooden decking as well as providing a safe non-slip surface.   However, in some public sectors it may be beneficial to use Decking Strips in Yellow to provide a contrasting color or highlighted surface.

5 YEAR GUARANTEE

It is warranted that all materials and workmanship utilized in the manufacture of Dino Grip Non-Slip products are of the highest quaility, and furthermore that these products will be:

• Resistant to wear under normal use and conditions.
• Resistant to degradation from surface exposure to the weather.
• Resistant to corrosion and a range of chemicals.
• Resistant to delamination through thermal expansion inequities.
• Resistant to delamination through impact except for the immediate impact zone.

If the Dino Grip Non-Slip products fail to comply with the Warranty, we shall replace such products at no cost to the customer within a period of 4 weeks after official notification.

Dino Grip Decking Strips Installation Guide

HOW TO INSTALL NON-SLIP DECKING STRIPS

STEP 1 – PREPARATION & SAFETY

The wooden decking surface should be swept, and then cleaned with a suitable decking wash to remove mildew and algae. Such cleaners are readily available on the market or alternatively please use our very own Decking Wash. This will make for easier installation, lengthen the lifespan of your decking and the Non-Slip Decking Strips, and ensure the surface is as anti-slip as possible.

All rotten decking should be removed and replaced prior to the installation of Non-Slip Decking Strips.  The Decking Strips are only designed to be installed onto pre-existing surfaces. Decking that is questionable or rotten may give way, and would, therefore, be unsafe for foot traffic.

When installing Dino Grip Decking Strips, we recommend that PPE (personal protective equipment) be worn, including safety gloves and glasses, as the strips are made of textured fiberglass.

STEP 2 – FIXING & TOOLS

You’ll need a drill with a screwdriver head and enough screws to secure the strips to the decking boards. The number of screws needed per strip can be found in our FAQ here.

We recommend that the Dino Grip Decking Strips be fixed into place using Galvanised or Stainless Steel flat star headed screw.  We do not recommend installing the Decking Strips using standard screws as these will rust, stain the decking and not sit flat into the Decking Strips, thereby creating an additional trip hazard. All of our Decking Strips come with free galvanised screws but we would recommended stainless steel screw installations near pools of water.

STEP 3 – CUTTING NON-SLIP DECKING STRIPS

We are able to cut down any size strip to the size you need before shipping – just let us know when placing your order. This service is absolutely FREE.

If you need to cut the Decking Strips to size yourself during your installation, we recommend that a suitable dust mask with protective safety goggles and gloves are worn.

The Decking Strips should be cut outside or in well-ventilated areas using a hack-saw, a jigsaw (with a tile blade) or by using a hand grinder.

Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.

STEP 4 – INSTALLING NON-SLIP DECKING STRIPS

Our Decking Strips are all pre-drilled, so you can install them instantly! Simply lay down all your Decking Strips, ensuring they are in the correct place and the correct size, and drill into place using an electric drill – with the correct screwdriver head, and screws.

CLEANING & MAINTENANCE

The decking surface should be regularly cleaned.  This allows all surface debris to be removed and reduces the build-up of mildew and algae, which are slippery and can cause a hazard.

The best way to keep your decking area clean is by using a mold and mildew cleaner, which can be applied using a stiff broom and removed with clean water.

	Dino Grip Cleaning Guide and Tips
	Dino Grip Decking Strips Data Sheet

 

Dino Grip Non-Slip Decking Strips are high performance safety decking strips, made from high quality FRP (Fiber Reinforced Plastic)/ GRP (Glass-fiber Reinforced Plastic). They are ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.

Wooden decking areas are notorious for becoming slippery when wet or with algae growth, and the decking strips are an easy alternative for those slippery areas and can be easily installed on your own. The Decking Strips are also suitable for installation in any high trafficked areas where a quick anti-slip solution is required.

Dino Grip Decking Strips are quick and easy to install and are available in a range of colors and sizes.

CHARACTERISTICS

• Slip Resistant Surface
• Impact Resistant
• Class 1 Flame Spread – Non-sparking
• Corrosion Resistant
• Lightweight
• Tough & Durable
• Choice of Colors
• Choice of Sizes
• Quick Installation
• Non Metallic

APPLICATIONS

Ideal for use in high traffic walkways, decking areas, pontoons, ramps, access bridges, etc.

TECHNICAL DATA

SLIP RESISTANT LEVELS

Measured using the Pendulum test method (Four S rubber slider / 96 Slider) – standard simulated shoe sole.

The UK Slip Resistance Group guide to slip resistance of a floor for able-bodied pedestrians.

To ensure that the above slip resistant levels are maintained, the Decking Strips should be kept clean in accordance with our Cleaning Guide and Tips.