Non Slip Ladder Rung Covers
$21.65 – $96.07
Dino Grip Ladder Rung Covers are a fiberglass product that has been manufactured for effective non-slip ladder steps. Prefabricated and ready to install, Dino Grip Ladder Rung Covers are the perfect solution to slippery ladder rungs.
Dino Grip Non-Slip Ladder Rung Covers are manufactured from FRP (Fiber Reinforced Plastic) / GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable product. These types of products have been proven to last in the most extreme environments.*
Our Ladder Rung Covers offer both a color differentiation and an anti-slip solution for any ladder rung. They are easy to install and can be fitted to almost any rung to create a safe solution. Suitable for DIY installations.
Need a different size? Call us and ask about our FREE custom cutting service!
- Theme Parks/ State Parks
- Boat/ Fishing Docks
- Industrial/ Factories
- Fire Stations
- Medical Facilities
Dino Grip will not be responsible for shade or color variation caused by application or substrate deficiencies, or fading resulting from natural causes such as weather.
- Anti-Slip / Non-Slip
- Installs on concrete, steel or wood
- Hard wearing, Tough & Durable
- Installs Over Virtually Any Substrate
- Choice of Colors
- Cut to Size
Dino Grip Ladder Rung Covers are available in multiple sizes ranging from 1ft, 1.1ft, 1.4ft, 2ft and 4ft in length. The rung covers are normally 0.16″ thick with the nosing set at 85 degrees on both sides.
Our free cutting service is available to meet your desired size.
Dino Grip Ladder Rung Covers are manufactured from FRP (Fiber Reinforced Plastic) / GRP (Glass-fiber Reinforced Plastic) to provide an extremely tough and durable product.
ANTI-SLIP / NON-SLIP
Dino Grip Ladder Rung Covers are pre-formed fiberglass rungs with an anti-slip / non-slip gritted top to provide a slip-resistant and hard-wearing surface. Dino Grip Non-Slip products may assist in meeting ADA requirements.
DO IT YOURSELF INSTALLATION
Dino Grip Ladder Rung Covers can be applied to almost any surface such as concrete, steel, and wood. These rung covers are supplied as a finished product, which means that they can be walked on immediately after installation.
When installing Dino Grip Ladder Rung Covers, we recommend that PPE (personal protective equipment) be worn.
CUTTING THE LADDER RUNG COVERS
If you need to cut the Ladder Rung Covers to size during your installation, we recommend that a suitable dust mask with protective safety goggles and gloves are worn. The Ladder Rung Covers should be cut outside or in a well-ventilated area. If using a circular saw or angle grinder, use a standard carbon or diamond blade when cutting them to size.
Dust residue can be disposed of using normal waste disposal methods. No special permissions or licenses are required.
INSTALLATION OF LADDER RUNG COVERS
During the installation of Dino Grip Ladder Rungs, we recommend that safety gloves and glasses be worn.
Dino Grip recommends that the surface is first cleaned to ensure that the surface is suitable to receive the Ladder Rung Covers.
FIXING TO WOODEN SURFACES
Lay the Ladder Rung Cover upon the surface and then use a 7/32″ masonry drill bit to drill the top of the gritted surface only in the desired anchoring locations. Then screw into position using the Flat star headed stainless steel or colored screws.
Additional adhesive can be used on the back of the Ladder Rung Covers prior to screwing into position (if require) to add extra grip to the underneath of the stair tread. The adhesive is available for purchase on our website.
FIXING TO METAL SURFACES
Lay the Ladder Rung Cover upon the surface and then use a 1/4″ masonry drill bit to drill the top of the gritted surface only in the desired fixing locations. Change the drill bit to a 1/4″ metal drill bit. Use drilling compound, then proceed to drill the metal surface under the Ladder Rung Cover (the Ladder Rung Cover can be kept in position during this process as it has already been drilled).
Place rivets into each hole and use a rivet gun to fix it into position. Please ensure that all rivets have been compressed.
Additional adhesive can be used to the back of the Ladder Rung Covers prior to fixing in position (if required) to add extra grip to the bottom of the Ladder Rung Cover.